300/500V SR Insulated & Overall Screened Control Cables (2-4 Cores & Multicores)
FFX200 05SOZ1-U (PH30/60)(CU/SR/OSCR/LSZH 300/500V Class 1)
FFX200 05SOZ1-R (PH30/60)(CU/SR/OSCR/LSZH 300/500V Class 2)
APPLICATION
The cables are primarily intended for use in the following applications:
BS 5266-1 for emergency lighting of premises
BS 5839-1 for fire detection and fire alarm systems in and around building
BS 5839-8 for voice alarm systems
BS 5839-9 for emergency voice communication systems.
STANDARDS
- Basic design to BS 7629-1
FIRE PERFORMANCE
| Circuit Integrity |
IEC 60331-21; BS 6387 CWZ; DIN VDE 0472-814(FE180); BS 8434-1 (30mins); BS 5839-1 Clause 26 2d; CEI 20-36/2-1; SS229-1; NBN C 30-004 (cat. F3); NF C32-070-2.3(CR1) |
| Circuit Integrity with mechanical shock |
EN 50200(PH30/60); CEI 20-36/4-0 |
| Circuit Integrity with mechanical shock & water spray |
EN 50200 annex E |
| System circuit integrity |
DIN 4102-12, E30 depending on lay system |
| Flame Retardance (Single Vertical Wire Test) |
EN 60332-1-2; IEC 60332-1-2; BS EN 60332-1-2; VDE 0482-332-1 ; NBN C 30-004 (cat. F1); NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1* |
| Reduced Fire Propagation (Vertically-mounted bundled wires & cable test) |
EN 60332-3-24 (cat. C); IEC 60332-3-24; BS EN 60332-3-24;VDE 0482-332-3; NBN C 30-004 (cat. F2); NF C32-070-2.2(C1); CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4 |
| Halogen Free |
IEC 60754-1; EN 50267-2-1; DIN VDE 0482-267-2-1; CEI 20-37/2-1 ; BS 6425-1* |
| No Corrosive Gas Emission |
IEC 60754-2; EN 50267-2-2; DIN VDE 0482-267-2-2; CEI 20-37/2-2 ; BS 6425-2* |
| Minimum Smoke Emission |
IEC 61034-1&2; EN 61034 -1&2; DIN VDE 0482-1034-1&2; CEI 20-37/3-1&2; EN 50268-1&2*; BS 7622-1&2* |
| No Toxic gases |
NES 02-713; NF C 20-454 |
Note: Asterisk * denotes superseded standard.
VOLTAGE RATING
CABLE CONSTRUCTION
| Conductors |
Plain annealed copper wire, solid according to IEC 60228 class 1, stranded according to IEC 60228 class 2 |
| Insulation |
Fire resistant special ceramized silicone rubber compound type EI2 as per BS 7655-1.1 |
| Cabling |
The cores are cabled together in concentric layers with suitable non-hygroscopic fillers |
| Overall screen |
Aluminum/polyester tape with tinned copper drain wire |
| Circuit Protective Conductor or Drain Wire |
Uninsulated tinned copper conductor of the same section and class as the insulated conductors in the 2-, 3-and 4-core cables. Drain wire of 0.5mm2 tinned copper conductor is provided in cables of more than 4 conductors |
| Sheath |
Thermoplastic LSZH compound type LTS3 as per BS 7655-6.1 (Thermosetting LSZH compound type SW2-SW4 as per BS 7655-2.6 can be offered.). UV resistance, hydrocarbon resistance, oil resistance, anti rodent and anti termite properties can be offered as option |
COLOUR CODE
Insulation Colour as per BS 7629
| Number of cores |
Core colours or numbering |
| 2 cores+uninsulated circuit protective conductor |
Brown, Blue or Brown, Brown |
| 3 cores+uninsulated circuit protective conductor |
Brown, Black, Grey |
| 4 cores+uninsulated circuit protective conductor |
Brown, Blue, Black, Grey |
| 7, 12 and19 cores+uninsulated drain wire |
Numbers 1, 2, 3, 4, 5, 6, 7 and upwardsor, for identification by colour, an identicalcolour(excluding brown and black),except for twoadjacent cores in each layer distinctively colouredbrown and black. |
Sheath Colour: Orange (other colours upon request)
PHYSICAL AND THERMAL PROPERTIES
| Temperature range during operation (fixed state) |
-30°C – +90°C |
| Temperature range during installation (mobile state) |
-20°C – +50°C |
| Minimum bending radius |
6 x Overall Diameter |
ELECTRICAL PROPERTIES
| Dielectric test |
2000 V r.m.s. x 5' (core/core) |
| Insulation resistance |
≥300 MΩ x km (at 20°C) |
| Short circuit temperature |
350°C |
CONSTRUCTION PARAMETER
| Cable Code |
No. of Core X Cross Section |
Nominal Insulation Thickness |
Nominal Sheath Thickness |
Nominal Overall Diameter |
Approx.Weight |
| |
mm2 |
mm |
mm |
mm |
kg/km |
| 2 Cores |
| FFX200 05SOZ1-U (PH30/60) 2G1.0 |
2x1.0 |
0.6 |
0.9 |
7.1 |
80 |
| FFX200 05SOZ1-U (PH30/60) 2G1.5 |
2x1.5 |
0.7 |
0.9 |
8.0 |
95 |
| FFX200 05SOZ1-U (PH30/60) 2G2.5 |
2x2.5 |
0.8 |
1.0 |
9.4 |
135 |
| FFX200 05SOZ1-R (PH30/60) 2G1.5 |
2x1.5 |
0.7 |
0.9 |
8.4 |
106 |
| FFX200 05SOZ1-R (PH30/60) 2G2.5 |
2x2.5 |
0.8 |
1.0 |
9.9 |
145 |
| FFX200 05SOZ1-R (PH30/60) 2G4.0 |
2x4.0 |
0.8 |
1.1 |
11.5 |
210 |
| 3 Cores |
| FFX200 05SOZ1-U (PH30/60) 3G1.0 |
3x1.0 |
0.6 |
0.9 |
8.0 |
95 |
| FFX200 05SOZ1-U (PH30/60) 3G1.5 |
3x1.5 |
0.7 |
0.9 |
8.5 |
115 |
| FFX200 05SOZ1-U (PH30/60) 3G2.5 |
3x2.5 |
0.8 |
1.0 |
10.0 |
170 |
| FFX200 05SOZ1-R (PH30/60) 3G1.5 |
3x1.5 |
0.7 |
0.9 |
8.9 |
134 |
| FFX200 05SOZ1-R (PH30/60) 3G2.5 |
3x2.5 |
0.8 |
1.0 |
10.3 |
180 |
| FFX200 05SOZ1-R (PH30/60) 3G4.0 |
3x4.0 |
0.8 |
1.1 |
12.2 |
260 |
| 4 Cores |
| FFX200 05SOZ1-U (PH30/60) 4G1.0 |
4x1.0 |
0.6 |
1.0 |
8.3 |
115 |
| FFX200 05SOZ1-U (PH30/60) 4G1.5 |
4x1.5 |
0.7 |
1.0 |
9.4 |
150 |
| FFX200 05SOZ1-U (PH30/60) 4G2.5 |
4x2.5 |
0.8 |
1.1 |
11.0 |
210 |
| FFX200 05SOZ1-R (PH30/60) 4G1.5 |
4x1.5 |
0.7 |
1.0 |
9.8 |
166 |
| FFX200 05SOZ1-R (PH30/60) 4G2.5 |
4x2.5 |
0.8 |
1.1 |
11.8 |
250 |
| FFX200 05SOZ1-R (PH30/60) 4G4.0 |
4x4.0 |
0.8 |
1.2 |
13.5 |
330 |
| 7 Cores |
| FFX200 05SOZ1-U (PH30/60) 7G1.0 |
7x1.0 |
0.6 |
1.0 |
10.0 |
165 |
| FFX200 05SOZ1-U (PH30/60) 7G1.5 |
7x1.5 |
0.7 |
1.1 |
11.3 |
225 |
| FFX200 05SOZ1-R (PH30/60) 7G2.5 |
7x2.5 |
0.8 |
1.2 |
14.2 |
375 |
| 12 Cores |
| FFX200 05SOZ1-U (PH30/60) 12G1.5 |
12x1.5 |
0.7 |
1.2 |
14.5 |
350 |
| FFX200 05SOZ1-R (PH30/60) 12G2.5 |
12x2.5 |
0.8 |
1.4 |
18.3 |
480 |
| 19 Cores |
| FFX200 05SOZ1-U (PH30/60) 19G1.5 |
19x1.5 |
0.7 |
1.3 |
17.0 |
520 |
ELECTRICALl PROPERTIES
| Conductor Operating Temperature |
90°C |
| Ambient Temperature |
30°C |
Current-Carrying Capacities (Amp)
| Conductor
cross-sectional
area |
Reference Method A
(enclosed in conduit
in thermally insulating wall etc) |
Reference Method B
(enclosed in conduit on a wall
or in trunking etc) |
Reference Method C
(clipped direct) |
Reference Method E
(in free air or on aperforated cable tray,
horizontal or vertical etc) Touching |
| 1 two-core cable*,
single-phase
a.c. or d.c. |
1 three-or four corecable*,
three-phase a.c. |
1 two-core cable*,
single-phase
a.c. or d.c. |
1 three-or four corecable*,
three-phase a.c. |
1 two-core cable*,
single-phase
a.c. or d.c. |
1 three-or four corecable*,
three-phase a.c. |
1 two-core cable*,
single-phase a.c. or d.c. |
1 three-or four corecable*,
three-phase a.c. |
| 1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
| mm2 |
A |
A |
A |
A |
A |
A |
A |
A |
| 1.0 |
14.5 |
13 |
17 |
15 |
19 |
17 |
21 |
18 |
| 1.5 |
18.5 |
16.5 |
22 |
19.5 |
24 |
22 |
26 |
23 |
| 2.5 |
25 |
22 |
30 |
26 |
33 |
30 |
36 |
32 |
| 4 |
33 |
30 |
40 |
35 |
45 |
40 |
49 |
42 |
Voltage Drop (Per Amp Per Meter)
| Conductor cross-sectional area |
Two-core cables, d.c. |
Two-core cable, single-phase a.c. |
Three-or four core cable,three-phase a.c. |
| 1 |
2 |
3 |
4 |
| mm2 |
mV/A/m |
mV/A/m |
mV/A/m |
| 1.0 |
46 |
46 |
40 |
| 1.5 |
31 |
31 |
27 |
| 2.5 |
19 |
19 |
16 |
| 4 |
12 |
12 |
10 |
